ThinTech Concrete CoatingClear Commercial Concrete Sealer
Seal it once. Hose it off. A clear protective coating for commercial concrete that cuts the cost of keeping it clean.
- Oil, diesel and hydraulic fluid don't stain it - independent lab test (QUATEST 3, 72-hour spot test)
- Less maintenance - spills and dirt rinse off with a garden hose; withstands multiple pressure washes
- Clear wet look - a clear gloss that slightly darkens the concrete (test a patch first)
- Thin, single component - spray or roll, one coat on most surfaces
- 5-year limited product warranty from the manufacturer; contact us for terms.
Coating plus the cleaner to prep the surface — in one order.
No payment now — we'll confirm availability and shipping before charging.
Overview
ThinTech Concrete Coating is a clear, single-component protective coating for commercial concrete that cuts the cost of keeping it clean. It forms a thin, non-permeable barrier so oil, salt and dirt stay on the surface instead of soaking in; after it is applied, routine cleaning is a hose.
Why it saves money
The expensive part of keeping concrete looking good is labor: resealing, stripping old sealer, pressure washing and removing stains. ThinTech Concrete Coating forms a thin, non-permeable barrier, so oil, salt and dirt stay on the surface instead of soaking in. Apply once; after that, routine cleaning is a hose.
How it works
A single-component, solvent-based coating that bonds to the concrete and dries to a clear, peel- and flake-resistant gloss. It protects against water, chloride ions, oil, fuel and hydraulic fluid, mild acids, food and beverage spills, bird and animal waste, salt spray and efflorescence.
Where it works
Hotel entrances and valet drives, club cart paths, entries and parking, parking decks, ramps and garages, warehouse and spill-containment floors, gas stations, exterior concrete walls, pavers and blocks.
Tested
- Chemical resistance, 72 h spot test (ASTM D1308): motor oil, diesel, hydraulic fluid - no blistering, no color change. Independent lab: QUATEST 3, 2023.
Full technical data in the TDS. Questions about a specific test or use: contact us.
Warranty
5-year limited product warranty from the manufacturer; contact us for terms.
Projects and contractors
Coating a hotel, club or facility? Send us the area and surface type and we will quote the project, including volume pricing for contractors.
Product specs
- Coverage: 250-450 sq ft per gallon (about 250 on broom finish and pavers, 350 on stamped, 450 on smooth concrete)
- Application: HVLP or airless spray, pump sprayer, or high-density roller - one thin coat
- Finish: clear gloss (wet look)
- Dry / cure: touch dry 2-3 h, walk on 8-12 h, no rain 48 h, vehicles after 7 days
- Application temperature: 45-105°F (7-41°C)
- VOC: see SDS
- Shelf life: 12 months unopened
- Sizes: 32 oz, 1 gallon, 5 gallon
- Origin: Manufactured by ThinTech Coatings. Distributed in the US by Tizbi Technologies.
Choose your size
| Your project | Pick | Includes |
|---|---|---|
| Not sure about the look? Test a corner first | Tester | 32 oz + step card - 60-110 sq ft |
| Small area: an entry, a step, touch-ups | 1 gallon | 250-450 sq ft |
| Larger areas, contractors | 5-gallon pail | 1,250-2,250 sq ft |
| Parking deck, whole property | Request a quote: volume pricing for multiple pails - request a quote | |
Preorder now; we'll contact you to confirm shipping.
How much do I need?
How to apply: 6 steps
Clean
Pressure wash. Scrub oil and grease with XD Bio Cleaner, 1 part to 8-10 parts water. Remove any old sealer: if water beads, a sealer is still there.
Rinse
Rinse with clean water until no cleaner is left.
Dry
Let it dry fully, usually overnight. Surface moisture 13% or less.
Check + test patch
pH strip reads 7-9. Coat a small corner: it dries to a wet look and darkens slightly.
Apply one thin coat
45-105°F, no rain for 48 h. Spray or roll in a cross pattern; don't puddle. Shake every 15-20 min.
Let it cure
Touch dry 2-3 h, walk 8-12 h, vehicles after 7 days. Clean tools with acetone right away.
Frequently asked questions
5-year limited product warranty from the manufacturer; contact us for terms. Actual wear depends on traffic and abrasion; a worn area can be lightly sanded and recoated.
A garden hose or a damp mop for routine cleaning. For oil drips, XD Bio Cleaner diluted in water. Avoid abrasive cleaners.
Yes, slightly: it dries to a clear gloss and darkens the concrete, like wet concrete. Always test a small area first.
It is a gloss finish. On ramps, steps and any area that gets wet, add an anti-slip additive.
Foot traffic after 8-12 hours; vehicles after 7 days.
Old sealers and silicones must be removed first. Over paint: only sound 2-component or epoxy paint, and test first. Not over latex, acrylic or 1-component alkyd paint.
Both. Indoors, ventilate well: it is solvent-based.
It's a thin, single-component coating: no mixing, faster to apply. It can also go on top of an epoxy floor as a protective topcoat.
Yes. Send the area and surface type for a quote, including volume pricing for contractors.
Within the US by ground; it is a flammable liquid, so no air or expedited shipping. Some states with strict VOC rules may be unavailable.